Manually Updating Firmware - Revision history

Admin at 01:36, 26 November 2015

2015-11-26T01:36:33Z

Admin at 10:03, 25 November 2015

2015-11-25T10:03:56Z

Admin at 09:15, 25 November 2015

2015-11-25T09:15:29Z

Admin at 09:14, 25 November 2015

2015-11-25T09:14:47Z

Admin at 09:11, 25 November 2015

2015-11-25T09:11:19Z

Admin at 09:08, 25 November 2015

2015-11-25T09:08:48Z

Admin at 09:08, 25 November 2015

2015-11-25T09:08:14Z

Admin at 09:07, 25 November 2015

2015-11-25T09:07:04Z

Admin at 09:03, 25 November 2015

2015-11-25T09:03:23Z

Admin at 09:02, 25 November 2015

2015-11-25T09:02:45Z

@@ Line 1: / Line 1: @@
-We would recommend that reboot the NAS first before starting to do the manual firmware update.&nbsp;
+<span style="font-size:medium;">We would recommend you to visit below link before&nbsp;starting to do the manual firmware update.</span><br/>http://wiki.qnap.com/wiki/What_to_do_if_firmware_update_failed&nbsp;
 Regarding how to update the firmware manually via command line, you will have to upload the firmware image (e.g. <span style="color: rgb(255, 0, 0);">TVS-X63_20151118-4.2.0.img</span>) to a shared folder in the NAS (e.g. Public) first, and then execute&nbsp;several commands with SSH/Telnet.
@@ Line 30: / Line 32: @@
 '''Note:'''&nbsp;While the update script runs, you will get some output feedback in the terminal, similar to the following. This particular update was conducted on a TVS-463, with update package as shown, TVS-463_20151118-4.2.0.img, so here, as with any update, the various commands listed above which reference a particular update image would change with whichever update image you need to use:
-<div style="background:#eee;border:1px solid #ccc;padding:5px 10px;"><span lang="EN-US" style="font-size: 7.5pt; font-family: Arial, sans-serif;"></span>cksum=548091281<br/>UBI device number 1, total 1728 LEBs (219414528 bytes, 209.2 MiB), available 1720 LEBs (218398720 bytes, 208.3 MiB), LEB size 126976 bytes (124.0 KiB)<br/>Set volume size to 218398720<br/>Volume ID 0, size 1720 LEBs (218398720 bytes, 208.3 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "tmp", alignment 1<br/>Using 120-bit encryption - (QNAPNASVERSION4)<br/>len=1048576<br/>model name = TS-X63<br/>version = 4.2.0<br/>IS_STORAGE_V2<br/>boot/<br/>config/<br/>fw_info<br/>libcrypto.so.1.0.0<br/>libssl.so.1.0.0<br/>rootfs2.ubi<br/>rootfs2.ubi.cksum<br/>uImage<br/>uImage.cksum<br/>update/<br/>update_img.sh<br/>4.2.0 20151118<br/>MODEL NAME = TS-X63,new version = 4.2.0<br/>limit version = 3.7.2<br/>Allow upgrade<br/>Allow upgrade<br/>/mnt/HDA_ROOT/update<br/>2015-11-25 17:55:18 Check CRC<br/>2015-11-25 17:55:18 cksum: uImage ...ok<br/>2015-11-25 17:55:20 cksum: rootfs2.ubi ...ok<br/>2015-11-25 17:55:20 Update uImage(Kernel + initrd.boot) to Recovery Partition<br/>2015-11-25 17:55:20 erase nand (mtd4)<br/>2015-11-25 17:55:20 write nand (mtd4)<br/>2015-11-25 17:55:25 Update rootfs2.ubi<br/>2015-11-25 17:55:25 write nand (mtd5)<br/>2015-11-25 17:56:18 Update uImage(Kernel + initrd.boot) to Main Partition<br/>2015-11-25 17:56:18 erase nand (mtd2)<br/>2015-11-25 17:56:18 write nand (mtd2)<br/>2015-11-25 17:56:23 Update Rootfs2.ubi<br/>2015-11-25 17:56:23 write nand (mtd3)<br/>2015-11-25 17:57:16 Update Finished<br/>set cksum [548091281]</div><div style="background:#eee;border:1px solid #ccc;padding:5px 10px;"><span lang="EN-US" style="font-size: 7.5pt; font-family: Arial, sans-serif;"></span></div>
+<div style="background:#eee;border:1px solid #ccc;padding:5px 10px;">cksum=548091281<br/>UBI device number 1, total 1728 LEBs (219414528 bytes, 209.2 MiB), available 1720 LEBs (218398720 bytes, 208.3 MiB), LEB size 126976 bytes (124.0 KiB)<br/>Set volume size to 218398720<br/>Volume ID 0, size 1720 LEBs (218398720 bytes, 208.3 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "tmp", alignment 1<br/>Using 120-bit encryption - (QNAPNASVERSION4)<br/>len=1048576<br/>model name = TS-X63<br/>version = 4.2.0<br/>IS_STORAGE_V2<br/>boot/<br/>config/<br/>fw_info<br/>libcrypto.so.1.0.0<br/>libssl.so.1.0.0<br/>rootfs2.ubi<br/>rootfs2.ubi.cksum<br/>uImage<br/>uImage.cksum<br/>update/<br/>update_img.sh<br/>4.2.0 20151118<br/>MODEL NAME = TS-X63,new version = 4.2.0<br/>limit version = 3.7.2<br/>Allow upgrade<br/>Allow upgrade<br/>/mnt/HDA_ROOT/update<br/>2015-11-25 17:55:18 Check CRC<br/>2015-11-25 17:55:18 cksum: uImage ...ok<br/>2015-11-25 17:55:20 cksum: rootfs2.ubi ...ok<br/>2015-11-25 17:55:20 Update uImage(Kernel + initrd.boot) to Recovery Partition<br/>2015-11-25 17:55:20 erase nand (mtd4)<br/>2015-11-25 17:55:20 write nand (mtd4)<br/>2015-11-25 17:55:25 Update rootfs2.ubi<br/>2015-11-25 17:55:25 write nand (mtd5)<br/>2015-11-25 17:56:18 Update uImage(Kernel + initrd.boot) to Main Partition<br/>2015-11-25 17:56:18 erase nand (mtd2)<br/>2015-11-25 17:56:18 write nand (mtd2)<br/>2015-11-25 17:56:23 Update Rootfs2.ubi<br/>2015-11-25 17:56:23 write nand (mtd3)<br/>2015-11-25 17:57:16 Update Finished<br/>set cksum [548091281]</div><div style="background:#eee;border:1px solid #ccc;padding:5px 10px;"></div>
 Then reboot the system after manually updating the firmware:
   # reboot
 [[Category:Servicing]]

@@ Line 30: / Line 30: @@
 '''Note:'''&nbsp;While the update script runs, you will get some output feedback in the terminal, similar to the following. This particular update was conducted on a TVS-463, with update package as shown, TVS-463_20151118-4.2.0.img, so here, as with any update, the various commands listed above which reference a particular update image would change with whichever update image you need to use:
-<div style="background:#eee;border:1px solid #ccc;padding:5px 10px;"><span lang="EN-US" style="font-size: 7.5pt; font-family: Arial, sans-serif;">cksum=1727365263 Using 120-bit encryption - (QNAPNASVERSION4)<br/>len=1048576<br/>model name = TVS-X63<br/>version = 4.2.0&nbsp;<br/>16+0 records in<br/>16+0 records out<br/>4.2.0<br/>OLD MODEL NAME = TVS-X63<br/>Allow upgrade boot/ config/ fw_info initrd.boot initrd.boot.cksum qpkg.tar qpkg.tar.cksum rootfs2.img rootfs2.img.cksum rootfs_ext.tgz rootfs_ext.tgz.cksum uImage uImage.cksum update/ update_check update_img.sh tune2fs 1.41.4 (27-Jan-2009) Setting maximal mount count to -1 Setting interval between checks to 0 seconds Update image using HDD ... Update Kernel ... 4030+1 records in<br/>4030+1 records out<br/>Update Basic RootFS ...<br/>17353+1 records in<br/>17353+1 records out<br/>Update Basic RootFS2 ...<br/>6144+0 records in<br/>6144+0 records out<br/>1+0 records in<br/>1+0 records out<br/>Update Finished.<br/>set cksum [1727365263]</span></div>
+<div style="background:#eee;border:1px solid #ccc;padding:5px 10px;"><span lang="EN-US" style="font-size: 7.5pt; font-family: Arial, sans-serif;"></span>cksum=548091281<br/>UBI device number 1, total 1728 LEBs (219414528 bytes, 209.2 MiB), available 1720 LEBs (218398720 bytes, 208.3 MiB), LEB size 126976 bytes (124.0 KiB)<br/>Set volume size to 218398720<br/>Volume ID 0, size 1720 LEBs (218398720 bytes, 208.3 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "tmp", alignment 1<br/>Using 120-bit encryption - (QNAPNASVERSION4)<br/>len=1048576<br/>model name = TS-X63<br/>version = 4.2.0<br/>IS_STORAGE_V2<br/>boot/<br/>config/<br/>fw_info<br/>libcrypto.so.1.0.0<br/>libssl.so.1.0.0<br/>rootfs2.ubi<br/>rootfs2.ubi.cksum<br/>uImage<br/>uImage.cksum<br/>update/<br/>update_img.sh<br/>4.2.0 20151118<br/>MODEL NAME = TS-X63,new version = 4.2.0<br/>limit version = 3.7.2<br/>Allow upgrade<br/>Allow upgrade<br/>/mnt/HDA_ROOT/update<br/>2015-11-25 17:55:18 Check CRC<br/>2015-11-25 17:55:18 cksum: uImage ...ok<br/>2015-11-25 17:55:20 cksum: rootfs2.ubi ...ok<br/>2015-11-25 17:55:20 Update uImage(Kernel + initrd.boot) to Recovery Partition<br/>2015-11-25 17:55:20 erase nand (mtd4)<br/>2015-11-25 17:55:20 write nand (mtd4)<br/>2015-11-25 17:55:25 Update rootfs2.ubi<br/>2015-11-25 17:55:25 write nand (mtd5)<br/>2015-11-25 17:56:18 Update uImage(Kernel + initrd.boot) to Main Partition<br/>2015-11-25 17:56:18 erase nand (mtd2)<br/>2015-11-25 17:56:18 write nand (mtd2)<br/>2015-11-25 17:56:23 Update Rootfs2.ubi<br/>2015-11-25 17:56:23 write nand (mtd3)<br/>2015-11-25 17:57:16 Update Finished<br/>set cksum [548091281]</div><div style="background:#eee;border:1px solid #ccc;padding:5px 10px;"><span lang="EN-US" style="font-size: 7.5pt; font-family: Arial, sans-serif;"></span></div>
 Then reboot the system after manually updating the firmware:
   # reboot
 [[Category:Servicing]]

@@ Line 30: / Line 30: @@
 '''Note:'''&nbsp;While the update script runs, you will get some output feedback in the terminal, similar to the following. This particular update was conducted on a TVS-463, with update package as shown, TVS-463_20151118-4.2.0.img, so here, as with any update, the various commands listed above which reference a particular update image would change with whichever update image you need to use:
+<div style="background:#eee;border:1px solid #ccc;padding:5px 10px;"><span lang="EN-US" style="font-size: 7.5pt; font-family: Arial, sans-serif;">cksum=1727365263 Using 120-bit encryption - (QNAPNASVERSION4)<br/>len=1048576<br/>model name = TVS-X63<br/>version = 4.2.0&nbsp;<br/>16+0 records in<br/>16+0 records out<br/>4.2.0<br/>OLD MODEL NAME = TVS-X63<br/>Allow upgrade boot/ config/ fw_info initrd.boot initrd.boot.cksum qpkg.tar qpkg.tar.cksum rootfs2.img rootfs2.img.cksum rootfs_ext.tgz rootfs_ext.tgz.cksum uImage uImage.cksum update/ update_check update_img.sh tune2fs 1.41.4 (27-Jan-2009) Setting maximal mount count to -1 Setting interval between checks to 0 seconds Update image using HDD ... Update Kernel ... 4030+1 records in<br/>4030+1 records out<br/>Update Basic RootFS ...<br/>17353+1 records in<br/>17353+1 records out<br/>Update Basic RootFS2 ...<br/>6144+0 records in<br/>6144+0 records out<br/>1+0 records in<br/>1+0 records out<br/>Update Finished.<br/>set cksum [1727365263]</span></div>
 Then reboot the system after manually updating the firmware:
   # reboot
 [[Category:Servicing]]

@@ Line 30: / Line 30: @@
 '''Note:'''&nbsp;While the update script runs, you will get some output feedback in the terminal, similar to the following. This particular update was conducted on a TVS-463, with update package as shown, TVS-463_20151118-4.2.0.img, so here, as with any update, the various commands listed above which reference a particular update image would change with whichever update image you need to use:
-<div><span lang="EN-US" style="font-size: 7.5pt; font-family: Arial, sans-serif;">cksum=1727365263 Using 120-bit encryption - (QNAPNASVERSION4) len=1048576 model name = TS-410 version = 3.5.2 16+0 records in 16+0 records out 3.5.2OLD MODEL NAME = TS-410 Allow upgrade boot/ config/ fw_info initrd.boot initrd.boot.cksum qpkg.tar qpkg.tar.cksum rootfs2.img rootfs2.img.cksum rootfs_ext.tgz rootfs_ext.tgz.cksum uImage uImage.cksum update/ update_check update_img.sh tune2fs 1.41.4 (27-Jan-2009) Setting maximal mount count to -1 Setting interval between checks to 0 seconds Update image using HDD ... Update Kernel ... 4030+1 records in 4030+1 records out Update Basic RootFS ... 17353+1 records in 17353+1 records out Update Basic RootFS2 ... 6144+0 records in 6144+0 records out 1+0 records in 1+0 records out Update Finished. set cksum [1727365263]</span><br/></div>
 Then reboot the system after manually updating the firmware:
   # reboot
 [[Category:Servicing]]

@@ Line 30: / Line 30: @@
 '''Note:'''&nbsp;While the update script runs, you will get some output feedback in the terminal, similar to the following. This particular update was conducted on a TVS-463, with update package as shown, TVS-463_20151118-4.2.0.img, so here, as with any update, the various commands listed above which reference a particular update image would change with whichever update image you need to use:
-<div style="background:#eee;border:1px solid #ccc;padding:5px 10px;">cksum=1727365263 Using 120-bit encryption - (QNAPNASVERSION4) <br/></div><div style="background:#eee;border:1px solid #ccc;padding:5px 10px;">len=1048576 <br/></div><div style="background:#eee;border:1px solid #ccc;padding:5px 10px;">model name = TVS-X63&nbsp;version = 4.2.0&nbsp;16+0 records in 16+0 records out 3.5.2OLD MODEL NAME = TVS-X63&nbsp;Allow upgrade boot/ config/ fw_info initrd.boot initrd.boot.cksum qpkg.tar qpkg.tar.cksum rootfs2.img rootfs2.img.cksum rootfs_ext.tgz rootfs_ext.tgz.cksum uImage uImage.cksum update/ update_check update_img.sh tune2fs 1.41.4 (27-Jan-2009) Setting maximal mount count to -1 Setting interval between checks to 0 seconds Update image using HDD ... Update Kernel ... 4030+1 records in 4030+1 records out Update Basic RootFS ... 17353+1 records in 17353+1 records out Update Basic RootFS2 ... 6144+0 records in 6144+0 records out 1+0 records in 1+0 records out Update Finished. set cksum [1727365263] [/] # &lt;/p&gt;&lt;p&gt;&lt;br /&gt; &lt;/p&gt;</div>
+<div><span lang="EN-US" style="font-size: 7.5pt; font-family: Arial, sans-serif;">cksum=1727365263 Using 120-bit encryption - (QNAPNASVERSION4) len=1048576 model name = TS-410 version = 3.5.2 16+0 records in 16+0 records out 3.5.2OLD MODEL NAME = TS-410 Allow upgrade boot/ config/ fw_info initrd.boot initrd.boot.cksum qpkg.tar qpkg.tar.cksum rootfs2.img rootfs2.img.cksum rootfs_ext.tgz rootfs_ext.tgz.cksum uImage uImage.cksum update/ update_check update_img.sh tune2fs 1.41.4 (27-Jan-2009) Setting maximal mount count to -1 Setting interval between checks to 0 seconds Update image using HDD ... Update Kernel ... 4030+1 records in 4030+1 records out Update Basic RootFS ... 17353+1 records in 17353+1 records out Update Basic RootFS2 ... 6144+0 records in 6144+0 records out 1+0 records in 1+0 records out Update Finished. set cksum [1727365263]</span><br/></div>
 Then reboot the system after manually updating the firmware:
   # reboot
 [[Category:Servicing]]

← Older revision		Revision as of 09:08, 25 November 2015
Line 30:		Line 30:

	'''Note:''' While the update script runs, you will get some output feedback in the terminal, similar to the following. This particular update was conducted on a TVS-463, with update package as shown, TVS-463_20151118-4.2.0.img, so here, as with any update, the various commands listed above which reference a particular update image would change with whichever update image you need to use:		'''Note:''' While the update script runs, you will get some output feedback in the terminal, similar to the following. This particular update was conducted on a TVS-463, with update package as shown, TVS-463_20151118-4.2.0.img, so here, as with any update, the various commands listed above which reference a particular update image would change with whichever update image you need to use:
−		+	<div style="background:#eee;border:1px solid #ccc;padding:5px 10px;"><p>cksum=1727365263 Using 120-bit encryption - (QNAPNASVERSION4) len=1048576 model name = TVS-X63 version = 4.2.0 16+0 records in 16+0 records out 3.5.2OLD MODEL NAME = TVS-X63 Allow upgrade boot/ config/ fw_info initrd.boot initrd.boot.cksum qpkg.tar qpkg.tar.cksum rootfs2.img rootfs2.img.cksum rootfs_ext.tgz rootfs_ext.tgz.cksum uImage uImage.cksum update/ update_check update_img.sh tune2fs 1.41.4 (27-Jan-2009) Setting maximal mount count to -1 Setting interval between checks to 0 seconds Update image using HDD ... Update Kernel ... 4030+1 records in 4030+1 records out Update Basic RootFS ... 17353+1 records in 17353+1 records out Update Basic RootFS2 ... 6144+0 records in 6144+0 records out 1+0 records in 1+0 records out Update Finished. set cksum [1727365263] [/] # </p><p><br /> </p></div>
−	<p>cksum=1727365263 Using 120-bit encryption - (QNAPNASVERSION4) len=1048576 model name = TVS-X63 version = 4.2.0 16+0 records in 16+0 records out 3.5.2OLD MODEL NAME = TVS-X63 Allow upgrade boot/ config/ fw_info initrd.boot initrd.boot.cksum qpkg.tar qpkg.tar.cksum rootfs2.img rootfs2.img.cksum rootfs_ext.tgz rootfs_ext.tgz.cksum uImage uImage.cksum update/ update_check update_img.sh tune2fs 1.41.4 (27-Jan-2009) Setting maximal mount count to -1 Setting interval between checks to 0 seconds Update image using HDD ... Update Kernel ... 4030+1 records in 4030+1 records out Update Basic RootFS ... 17353+1 records in 17353+1 records out Update Basic RootFS2 ... 6144+0 records in 6144+0 records out 1+0 records in 1+0 records out Update Finished. set cksum [1727365263] [/] # </p><p><br /> </p>
−

@@ Line 20: / Line 20: @@
 <br/>After the above two checks, execute the commands below to perform the update. If updating from 4.0.x to 4.0.5, 4.0.6, 4.0.7, 4.1 or newer, do not copy or move the image to HDA_ROOT/update, let's make a work copy on public. This is required avoid any "System update failed. No enough space on RAM/ disk available for firmware update." errors:
-#Copy the image file to the normal update location:<pre># cp /share/Public/TVS-X63_20151118-4.2.0.img /share/Public/TVS-X63_20151118-4.2.0-work.img</pre>
+. Copy the image file to the normal update location:
-#Create a link to the /mnt/update location:<pre># ln -sf /mnt/HDA_ROOT/update /mnt/update</pre>
+. Create a link to the /mnt/update location:
-#Run the update script:<pre># /etc/init.d/update.sh /share/Public/TVS-X63_20151118-4.2.0-work.img</pre>
+. Run the update script:
 <pre># /etc/init.d/update.sh /share/Public/TVS-X63_20151118-4.2.0-work.img</pre>
 &lt;p&gt;cksum=1727365263 Using 120-bit encryption - (QNAPNASVERSION4) len=1048576 model name = TVS-X63&nbsp;version = 4.2.0&nbsp;16+0 records in 16+0 records out 3.5.2OLD MODEL NAME = TVS-X63&nbsp;Allow upgrade boot/ config/ fw_info initrd.boot initrd.boot.cksum qpkg.tar qpkg.tar.cksum rootfs2.img rootfs2.img.cksum rootfs_ext.tgz rootfs_ext.tgz.cksum uImage uImage.cksum update/ update_check update_img.sh tune2fs 1.41.4 (27-Jan-2009) Setting maximal mount count to -1 Setting interval between checks to 0 seconds Update image using HDD ... Update Kernel ... 4030+1 records in 4030+1 records out Update Basic RootFS ... 17353+1 records in 17353+1 records out Update Basic RootFS2 ... 6144+0 records in 6144+0 records out 1+0 records in 1+0 records out Update Finished. set cksum [1727365263] [/] # &lt;/p&gt;&lt;p&gt;&lt;br /&gt; &lt;/p&gt;

← Older revision		Revision as of 09:03, 25 November 2015
Line 28:		Line 28:
	<br/>'''Note:''' While the update script runs, you will get some output feedback in the terminal, similar to the following. This particular update was conducted on a TVS-463, with update package as shown, TVS-463_20151118-4.2.0.img, so here, as with any update, the various commands listed above which reference a particular update image would change with whichever update image you need to use:		<br/>'''Note:''' While the update script runs, you will get some output feedback in the terminal, similar to the following. This particular update was conducted on a TVS-463, with update package as shown, TVS-463_20151118-4.2.0.img, so here, as with any update, the various commands listed above which reference a particular update image would change with whichever update image you need to use:

−	~~'''If you get some error similar with: "undefined symbol: lock_system_update"<br/>then run the command below and do the update procedure again'''~~
−	~~<pre>rm /sbin/lock_system_update; echo '#!/bin/sh' > /sbin/lock_system_update; chmod +x /sbin/lock_system_update</pre>~~
−	~~<pre>[/] # /etc/init.d/update.sh /mnt/HDA_ROOT/update/TS-410_3.5.2_Build1126.img~~
−	~~</pre>~~

	<p>cksum=1727365263 Using 120-bit encryption - (QNAPNASVERSION4) len=1048576 model name = TVS-X63 version = 4.2.0 16+0 records in 16+0 records out 3.5.2OLD MODEL NAME = TVS-X63 Allow upgrade boot/ config/ fw_info initrd.boot initrd.boot.cksum qpkg.tar qpkg.tar.cksum rootfs2.img rootfs2.img.cksum rootfs_ext.tgz rootfs_ext.tgz.cksum uImage uImage.cksum update/ update_check update_img.sh tune2fs 1.41.4 (27-Jan-2009) Setting maximal mount count to -1 Setting interval between checks to 0 seconds Update image using HDD ... Update Kernel ... 4030+1 records in 4030+1 records out Update Basic RootFS ... 17353+1 records in 17353+1 records out Update Basic RootFS2 ... 6144+0 records in 6144+0 records out 1+0 records in 1+0 records out Update Finished. set cksum [1727365263] [/] # </p><p><br /> </p>		<p>cksum=1727365263 Using 120-bit encryption - (QNAPNASVERSION4) len=1048576 model name = TVS-X63 version = 4.2.0 16+0 records in 16+0 records out 3.5.2OLD MODEL NAME = TVS-X63 Allow upgrade boot/ config/ fw_info initrd.boot initrd.boot.cksum qpkg.tar qpkg.tar.cksum rootfs2.img rootfs2.img.cksum rootfs_ext.tgz rootfs_ext.tgz.cksum uImage uImage.cksum update/ update_check update_img.sh tune2fs 1.41.4 (27-Jan-2009) Setting maximal mount count to -1 Setting interval between checks to 0 seconds Update image using HDD ... Update Kernel ... 4030+1 records in 4030+1 records out Update Basic RootFS ... 17353+1 records in 17353+1 records out Update Basic RootFS2 ... 6144+0 records in 6144+0 records out 1+0 records in 1+0 records out Update Finished. set cksum [1727365263] [/] # </p><p><br /> </p>

@@ Line 1: / Line 1: @@
-Regarding how to update the firmware manually via command line, you will have to upload the firmware image (e.g. <span style="color: rgb(255, 0, 0);">TS-209_2.1.2_build1031.img</span>) to a shared folder in the NAS (e.g. Public) first, and then execute&nbsp;several commands with SSH/Telnet.<br>
+We would recommend that reboot the NAS first before starting to do the manual firmware update.&nbsp;
-If the firmware file is a zip file, then wherever you have copied it to on the server, firstly unzip it:
+Regarding how to update the firmware manually via command line, you will have to upload the firmware image (e.g. <span style="color: rgb(255, 0, 0);">TVS-X63_20151118-4.2.0.img</span>) to a shared folder in the NAS (e.g. Public) first, and then execute&nbsp;several commands with SSH/Telnet.
- # unzip TS-410_3.5.2_Build1126.zip
+If the firmware file is a zip file, please unzip the file first&nbsp;on your PC/Mac and&nbsp;then copy it to the server.
-You will get some minimal output with the above command:
+'''[Two important checks]'''
- Archive: TS-410_3.5.2_Build1126.zip
+(1) Please make sure the folder&nbsp;/mnt/HDA_ROOT/update exists.
-'''[Two important checks]'''<br>
+If it does not exist, create it using
-(1) Please make sure there is /mnt/HDA_ROOT/update folder.
+(2) Confirm no /mnt/update file or folder and no /tmp/update_process file exist.
-If it does not exist, create it using<br>
+If it exists, you need to delete it using:
-<pre># mkdir /mnt/HDA_ROOT/update</pre>
+<pre># rm -rf /mnt/update</pre>
-(2) Confirm no /mnt/update file or folder.
+<pre style="line-height: 20.8px;"># rm -f /tmp/update_process</pre>
-If it exists, you need to delete it using:<br>
+<br/>After the above two checks, execute the commands below to perform the update. If updating from 4.0.x to 4.0.5, 4.0.6, 4.0.7, 4.1 or newer, do not copy or move the image to HDA_ROOT/update, let's make a work copy on public. This is required avoid any "System update failed. No enough space on RAM/ disk available for firmware update." errors:
-"rm: unable to remove '/mnt/update': Device or resource busy", unmount the folder and try the rm line above again. To unmount use:
+#Copy the image file to the normal update location:<pre># cp /share/Public/TVS-X63_20151118-4.2.0.img /share/Public/TVS-X63_20151118-4.2.0-work.img</pre>
-#Copy the image file to the normal update location:<pre># cp /share/Public/TS-119_20131219-4.1.0.img /share/Public/TS-119_20131219-4.1.0-work.img</pre>
+#Create a link to the /mnt/update location:<pre># ln -sf /mnt/HDA_ROOT/update /mnt/update</pre>
-<br> Keeping the "original" procedure here - not to be repeated when doing the above 1-2-3. After the above two checks, execute the commands below to perform the update.
+#Run the update script:<pre># /etc/init.d/update.sh /share/Public/TVS-X63_20151118-4.2.0-work.img</pre>
-#Copy the image file to the normal update location:<pre># mv /share/Public/TS-209_2.1.2_build1031.img /mnt/HDA_ROOT/update/</pre>
+<br/>'''Note:'''&nbsp;While the update script runs, you will get some output feedback in the terminal, similar to the following. This particular update was conducted on a TVS-463, with update package as shown, TVS-463_20151118-4.2.0.img, so here, as with any update, the various commands listed above which reference a particular update image would change with whichever update image you need to use:
-'''Note''' while the update script runs, you will get some output feedback in the terminal, similar to the following. This particular update was conducted on a TS-410, with update package as shown, TS-410_3.5.2_Build1126.img, so here, as with any update, the various commands listed above which reference a particular update image would change with whichever update image you need to use:
+'''If you get some error&nbsp;similar with: "undefined symbol: lock_system_update"<br/>then run the command below and do the update procedure again'''
-'''If you get some error&nbsp;similar with: "undefined symbol: lock_system_update"<br>then run the command below and do the update procedure again<br>'''
+&lt;p&gt;cksum=1727365263 Using 120-bit encryption - (QNAPNASVERSION4) len=1048576 model name = TVS-X63&nbsp;version = 4.2.0&nbsp;16+0 records in 16+0 records out 3.5.2OLD MODEL NAME = TVS-X63&nbsp;Allow upgrade boot/ config/ fw_info initrd.boot initrd.boot.cksum qpkg.tar qpkg.tar.cksum rootfs2.img rootfs2.img.cksum rootfs_ext.tgz rootfs_ext.tgz.cksum uImage uImage.cksum update/ update_check update_img.sh tune2fs 1.41.4 (27-Jan-2009) Setting maximal mount count to -1 Setting interval between checks to 0 seconds Update image using HDD ... Update Kernel ... 4030+1 records in 4030+1 records out Update Basic RootFS ... 17353+1 records in 17353+1 records out Update Basic RootFS2 ... 6144+0 records in 6144+0 records out 1+0 records in 1+0 records out Update Finished. set cksum [1727365263] [/] # &lt;/p&gt;&lt;p&gt;&lt;br /&gt; &lt;/p&gt;
-</pre>
+Then reboot the system after manually updating the firmware:
   # reboot
 [[Category:Servicing]]